The Moto G Power (2024), also sold as the Moto G Power 5G (2024) in the U.S., can use eSIM on supported regional and carrier variants. This guide assumes a U.S. Moto G Power (2024) running Motorola's near-stock Android 14 software, where the eSIM path is in Settings > Network & internet > SIMs.
An iRoamly travel eSIM is useful when you want mobile data at your destination without changing your physical SIM. The QR code method is usually the fastest, while manual entry is the backup path when you are reading the QR code on the same phone or the camera cannot scan it.
The screens and labels below are written for Android 14 on Moto G Power (2024). Menu names can vary slightly by software version, country, carrier firmware, and whether your specific variant has eSIM enabled.
Before You Set Up Your iRoamly eSIM
Connect the Moto G Power (2024) to stable Wi-Fi before installing the eSIM.
Confirm that your phone is unlocked and that your exact regional/carrier variant supports eSIM.
Keep your iRoamly QR code, SM-DP+ Address, Activation Code, and any optional Confirmation Code available.
Install the travel eSIM 1-2 days before travel when possible, but check your plan details first. iRoamly eSIM validity starts from activation, and the exact activation trigger can vary by plan.
Do not delete the iRoamly eSIM after installation unless iRoamly support tells you to. Many travel eSIMs cannot be reused after deletion.
iRoamly eSIM plans may be data-only. Voice calls and SMS vary by plan, so check the plan page or order details before relying on them.
Method 1: Install eSIM by Scanning a QR Code
Open Settings on your Moto G Power (2024). You should see the main Android Settings list.
Tap Network & internet. The phone should open the page that manages Wi-Fi, SIMs, hotspot, and related network settings.
Tap SIMs. You should see the SIM management screen, including your current SIM and an option to add another SIM or eSIM.
Tap Add SIM, then choose the eSIM download option if Android asks whether you want to use a physical SIM or download a SIM. The phone should open the eSIM setup flow.
Tap Next on the eSIM setup screen, then point the camera at the iRoamly QR code. Keep the QR code flat, bright, and fully inside the scanner frame.
When Android identifies the iRoamly eSIM, tap Download or Add and wait for the download to finish. If Android asks for confirmation, keep the iRoamly eSIM enabled.
Tap Done after the installation completes. The iRoamly eSIM should now appear in the phone's SIMs list.
Method 2: Install eSIM Manually
Open Settings on your Moto G Power (2024). You should be back on the main Android Settings list.
Tap Network & internet. The phone should show the network settings page.
Tap SIMs. The SIM management screen should show your current line and the add-SIM option.
Tap Add SIM, then choose the option to download a SIM if the phone asks. Continue until the QR scanner appears.
On the QR scanner screen, tap Enter code manually or Need help? if the manual option is shown there. Android should open a manual activation page.
Enter the iRoamly SM-DP+ Address and Activation Code exactly as provided. If your iRoamly details include a Confirmation Code, enter it only when Android shows that optional field.
Tap Continue, then tap Download or Add when Android finds the iRoamly eSIM profile. Keep the phone on Wi-Fi until the process finishes.
Tap Done after the manual installation completes. The iRoamly eSIM should appear with your other SIM profiles.
How to Confirm Your iRoamly eSIM Is Installed
Open Settings > Network & internet > SIMs. Look for the newly added iRoamly eSIM or travel eSIM profile in the SIM list.
Tap the iRoamly eSIM profile and confirm that Use SIM is turned on. The line should not show as deleted or unavailable.
If you are already at your destination, watch for signal bars after the line connects. Then open a browser or maps app to test mobile data.
Configure eSIM for Mobile Data
Open Settings > Network & internet > SIMs, then tap the iRoamly eSIM profile. The eSIM detail page should show mobile data and roaming controls.
Turn on Mobile data for the iRoamly eSIM when you are ready to use the travel plan. If Android asks which SIM should use data, choose the iRoamly eSIM.
Turn on Roaming for the iRoamly eSIM if your destination plan requires roaming. Keep your primary SIM's data off if you want to avoid accidental roaming charges.
Turn off automatic data switching if your software shows a setting that lets Android switch mobile data to another SIM. The iRoamly eSIM should remain the active data line while you travel.
Troubleshooting
If Add SIM or the eSIM download option is missing, your Moto G Power (2024) variant, region, carrier firmware, or current mobile plan may not support eSIM. Check with the seller or carrier for that exact device.
If the QR code does not scan, increase screen brightness on the device showing the code, clean the Moto camera lens, and keep the QR code inside the scanner frame. Use manual entry if scanning still fails.
If Android says the QR code was already used, do not delete and retry repeatedly. Contact iRoamly support because most eSIM QR codes can be installed only once.
If manual entry fails, check every character in the SM-DP+ Address and Activation Code. Do not add spaces unless the iRoamly instructions show them.
If the eSIM installs but has no data, confirm that Use SIM, Mobile data, and Roaming are enabled for the iRoamly eSIM, then restart the phone.
If activation stays pending, keep the phone on Wi-Fi and wait a few minutes. Some plans finish activation only when the phone reaches a supported destination network.
If calls or SMS do not work, check the iRoamly plan details. Many travel eSIM plans are data-only.
Conclusion
For Moto G Power (2024) on Motorola's Android 14 software, scanning the iRoamly QR code through Settings > Network & internet > SIMs is the simplest path because Android handles the download after the QR code is recognized. Manual entry reaches the same result, but it needs careful copying of the SM-DP+ Address and Activation Code.
After installation, return to SIMs and confirm the iRoamly profile is visible with Use SIM enabled. Before relying on it abroad, choose the iRoamly eSIM for mobile data, turn on roaming when your plan requires it, and keep your primary SIM from taking over data if you want the travel eSIM to carry the connection.