The Moto G75 5G uses Motorola's near-stock Android interface, so the eSIM setup path is usually found under Settings > Network & internet > SIMs. This guide assumes a Moto G75 running Android 14 / Motorola My UX, with English system labels.
An iRoamly travel eSIM can be useful when you want mobile data abroad without changing your physical SIM. Before installing, make sure your Moto G75 variant supports eSIM in your region and is unlocked for travel use.
This guide covers both setup methods: scanning the iRoamly QR code and entering the eSIM details manually. The QR method is usually fastest, while manual entry is useful if the QR code cannot be scanned or you are setting up from the same phone that displays the QR code.
Before You Set Up Your iRoamly eSIM
Connect the Moto G75 to stable Wi-Fi before starting the eSIM download.
Keep your iRoamly QR code, SM-DP+ Address, activation code, and optional confirmation code ready.
Confirm that your Moto G75 is unlocked and that your regional model supports eSIM.
Update the phone software if Settings > System shows an available update.
Install the iRoamly eSIM 1-2 days before travel when possible, but check your plan timing first.
iRoamly eSIM validity starts from activation. The exact activation trigger can vary by plan, such as installation or first connection to a supported destination network, so check your iRoamly order or plan details before installing too early.
Many iRoamly travel eSIM plans are data-focused. Voice calls and SMS availability varies by plan, so do not assume calls or texts are included unless your plan details say so.
Do not delete the eSIM after installation unless iRoamly support tells you to. A used eSIM QR code may not be reusable.
Method 1: Install eSIM by Scanning a QR Code
1. Open Settings on your Moto G75 and tap Network & internet. You should see the network settings page next.
2. Tap SIMs on the Network & internet page. The phone opens the SIM management screen.
3. Tap Add eSIM on the SIMs screen. On some regional software builds, this may appear as Add SIM; choose the eSIM download option if Android asks what type of SIM to add.
4. Point the scanner at the iRoamly QR code from your order page or email. Keep the QR code inside the scan frame until Android recognizes it.
5. Review the detected iRoamly eSIM profile and tap Download. Keep the phone on Wi-Fi while Android downloads and adds the eSIM.
Method 2: Install eSIM Manually
1. Open Settings on your Moto G75 and tap Network & internet. This is the same entry point used for QR setup.
2. Tap SIMs on the Network & internet page. The SIMs page shows your physical SIM and available eSIM options.
3. Tap Add eSIM. If your phone shows Add SIM instead, select the option to download or set up an eSIM.
4. On the QR scanner page, tap Enter details manually. Android opens the manual eSIM entry form.
5. Enter the SM-DP+ Address and Activation Code exactly as iRoamly provides them. Enter the Confirmation Code only if iRoamly provides one, then tap Next.
6. Review the iRoamly eSIM profile and tap Download. Wait for Android to finish adding the eSIM before leaving the setup screen.
How to Confirm Your iRoamly eSIM Is Installed
1. Go to Settings > Network & internet > SIMs. Look for an eSIM profile such as iRoamly Travel eSIM and make sure its switch is turned on.
2. Tap the iRoamly eSIM profile. The details page should show Use SIM turned on, which means the profile is available on the phone.
3. If your iRoamly plan includes only data, test mobile data instead of calls or SMS. Calls and SMS should only be tested when your specific plan states that those services are included.
Configure eSIM for Mobile Data
1. Open Settings > Network & internet > SIMs, then tap iRoamly Travel eSIM. This opens the eSIM details page.
2. Turn on Use SIM and Mobile data for the iRoamly eSIM. If the phone asks which SIM should use mobile data, choose the iRoamly eSIM for travel data.
3. Turn on Roaming if your iRoamly plan or destination instructions require it. When you arrive, keep your primary SIM from taking over data unless you want to use your home carrier.
Troubleshooting
Add eSIM is missing: Confirm your Moto G75 variant supports eSIM, update Android, restart the phone, and check whether your carrier or region disables eSIM on that model.
QR code will not scan: Increase screen brightness on the device showing the QR code, clean the Moto G75 camera lens, and make sure the full QR code is visible. If it still fails, use manual entry.
QR code was already used: Do not delete the eSIM and try to scan again. Many eSIM QR codes are single-use; contact iRoamly support from your order page.
Manual activation fails: Recheck the SM-DP+ Address, Activation Code, and optional confirmation code. Extra spaces or swapped characters can stop the download.
eSIM is installed but no data works: Open Settings > Network & internet > SIMs, choose the iRoamly eSIM for mobile data, turn on Roaming when required, and restart the phone after arrival.
Activation stays pending: Stay on Wi-Fi, wait a few minutes, then restart the Moto G75. Some plans complete activation only after the phone connects to a supported destination network.
Calls or SMS do not work: Check your iRoamly plan details. Travel eSIM service may be data-only, and voice/SMS support is not included on every plan.
Conclusion
For the Moto G75, scanning the iRoamly QR code is the easiest route because Android takes you from SIMs to the QR scanner and then to Download with very little typing. Manual setup is still a reliable backup when you have the SM-DP+ Address and activation code, especially if the QR code is on the same phone.
After installation, return to Settings > Network & internet > SIMs and confirm that iRoamly Travel eSIM appears with Use SIM turned on. Before you travel, set the iRoamly eSIM for mobile data, enable roaming if your plan requires it, and keep your primary SIM from using data unless you deliberately choose it.