Install Travel eSIM on Oppo Find N2 Flip in Minutes

The Oppo Find N2 Flip supports eSIM on compatible carrier and regional variants, and OPPO lists the phone with ColorOS 13.0, a 6.8-inch 2520 x 1080 main display, and carrier-dependent eSIM support. Before installing an iRoamly travel eSIM, confirm that your exact Find N2 Flip variant shows the eSIM option under ColorOS.

For travelers, an iRoamly eSIM can provide mobile data without swapping the physical nano-SIM in the phone. This is useful when you want to keep your regular SIM in place while using a travel data plan abroad.

This guide covers both setup paths on the Oppo Find N2 Flip: scanning the iRoamly QR code and entering the eSIM details manually. Menu labels may vary slightly by ColorOS update, region, or carrier firmware, but the expected path is Settings > Mobile network > eSIM.

Before You Set Up Your iRoamly eSIM

• Connect the Oppo Find N2 Flip to stable Wi-Fi before starting.

• Check that the phone is unlocked and that your regional/carrier variant supports eSIM.

• Open your iRoamly order page or email on another device if you plan to scan the QR code.

• Keep the manual details ready: SM-DP+ Address, Activation Code, and Confirmation Code if iRoamly provides one.

• Install the iRoamly eSIM 1-2 days before travel when the plan instructions allow it, but check your plan because validity starts from activation. For many travel eSIMs, activation can occur when the eSIM is installed or when it first connects to a supported destination network, depending on the plan.

• Do not delete the iRoamly eSIM after installation unless support tells you to. Many eSIM profiles cannot be reinstalled after removal.

• iRoamly plans may be data-only. Voice calls and SMS vary by plan, so check the plan details before relying on those services.

Method 1: Install eSIM by Scanning a QR Code

1. Open Settings on the Oppo Find N2 Flip, then tap Mobile network. You should see SIM and mobile data options for the phone.

2. Tap eSIM. If eSIM is supported on your variant, ColorOS should open the eSIM management page.

3. Tap Add eSIM. The phone should start the flow for adding a new digital SIM profile.

4. Tap Scan QR code, then point the camera at the iRoamly QR code from your order page or email. Keep the QR code flat, bright, and fully visible.

5. Review the detected iRoamly eSIM profile, then tap Download or Add when ColorOS asks to download the eSIM. Stay on Wi-Fi until the download finishes.

6. Tap Done after the eSIM is added. If ColorOS asks whether to turn on the new eSIM now, choose the option that matches your travel timing.

Method 2: Install eSIM Manually

1. Open Settings, then tap Mobile network. This starts from the same ColorOS network settings page used for QR setup.

2. Tap eSIM to open the eSIM management page. If the eSIM menu is missing, check the troubleshooting section before continuing.

3. Tap Add eSIM. The phone should show the available setup methods.

4. Tap Enter manually or Need help? Enter details manually. ColorOS should open a form for the activation information.

5. Enter the SM-DP+ Address and Activation Code exactly as shown by iRoamly. If a Confirmation Code field appears and iRoamly provides one, enter it; otherwise leave that optional field blank. Then tap Continue.

6. Review the iRoamly eSIM profile, then tap Download or Add. Keep the phone connected to Wi-Fi until ColorOS finishes installing the profile.

7. Tap Done when the installation finishes. The iRoamly eSIM should now appear in the eSIM list.

How to Confirm Your iRoamly eSIM Is Installed

1. Go to Settings > Mobile network > eSIM. Look for the newly added iRoamly eSIM profile in the eSIM list.

2. Tap the iRoamly eSIM profile and check that it is available to turn on. You may also see profile details such as the line label or carrier profile name.

3. If your iRoamly plan supports SMS or calls, test those only after the plan is active and connected. If the plan is data-only, use a browser or maps app to confirm mobile data instead.

Configure eSIM for Mobile Data

1. Open Settings > Mobile network, then tap Mobile data or Default mobile data. Select the iRoamly eSIM as the preferred data line when you are ready to use the travel plan.

2. Open the iRoamly eSIM details page and turn on Data roaming if your destination plan requires roaming. Travel eSIMs often need roaming enabled to connect to partner networks.

3. Turn off automatic data switching or avoid switching back to your primary SIM if you want to prevent unwanted roaming charges on your regular line.

4. When you arrive, check the status bar for signal, open a webpage, and confirm that mobile data uses the iRoamly eSIM rather than the physical SIM.

Troubleshooting

• Add eSIM is missing: confirm that your Find N2 Flip regional model supports eSIM, update ColorOS, restart the phone, and check whether your carrier firmware hides eSIM features.

• QR code will not scan: increase screen brightness on the device showing the QR code, clean the camera lens, keep the code flat, or switch to manual entry.

• QR code says it was already used: do not delete the eSIM. Contact iRoamly support because many eSIM QR codes can be installed only once.

• Manual details fail: recheck the SM-DP+ Address and Activation Code character by character. Avoid extra spaces when copying from the iRoamly order page.

• eSIM stays activating: keep Wi-Fi on, wait several minutes, restart the phone, and try again in the destination country if the plan activates only on a supported network.

• No data after installation: select the iRoamly eSIM for mobile data, turn on Data roaming when required, disable unwanted switching to the primary SIM, and confirm the plan is active.

• eSIM appears but has no signal: check the destination coverage and supported networks in your iRoamly plan, then manually select a supported local network if automatic selection does not connect.

Conclusion

Scanning the iRoamly QR code is the quickest route on the Oppo Find N2 Flip because ColorOS can move from Mobile network > eSIM > Add eSIM straight into the scanner. Manual setup is the backup path when the QR code is on the same phone or the camera cannot read it, as long as you enter the SM-DP+ Address and Activation Code exactly.

After installation, return to the eSIM page to confirm that the iRoamly profile is listed, then choose it for mobile data when you are ready to travel. Before using the plan abroad, check the validity rules for your exact iRoamly package, enable data roaming if the destination requires it, and keep your regular SIM from taking over mobile data by accident.