The Motorola Edge 50 Fusion can use eSIM on supported regional models, making it a practical phone for travelers who want mobile data without changing a physical SIM card. Because Motorola availability can vary by market and carrier firmware, check that your exact Edge 50 Fusion variant shows an eSIM option before you purchase or install.
This guide assumes the Motorola Edge 50 Fusion is running Android 14 with Motorola Hello UI, where the eSIM path is usually Settings > Network & internet > SIMs > Add SIM. Menu names may vary slightly after software updates, but the key labels to look for are Network & internet, SIMs, Add SIM, and Set up an eSIM.
You will learn two complete iRoamly travel eSIM setup methods: scanning the QR code and entering the details manually. QR setup is usually fastest, while manual entry helps when you are installing from the same phone, using a second screen is not convenient, or the camera cannot read the QR code.
Before You Set Up Your iRoamly eSIM
Connect the Motorola Edge 50 Fusion to stable Wi-Fi before you start. The phone needs internet access to download and activate the eSIM profile.
Make sure the phone is unlocked and that your exact regional model supports eSIM. If Add SIM or Set up an eSIM is missing, the model, region, carrier firmware, or software version may not support eSIM.
Keep the iRoamly QR code open on another screen, or have the manual details ready. Manual setup normally uses an SM-DP+ Address and an Activation Code; use a Confirmation Code only if iRoamly provides one.
Install the iRoamly eSIM 1 to 2 days before travel when possible, but do not activate paid travel data earlier than needed if your plan starts counting after activation. iRoamly plan validity starts from activation; check your plan page for the exact activation trigger.
Do not delete the iRoamly eSIM after installing unless iRoamly support tells you to. Many travel eSIM profiles cannot be reinstalled after removal.
Check your plan details before relying on calls or texts. iRoamly travel eSIM plans may be data-only, and voice or SMS availability varies by plan.
Method 1: Install eSIM by Scanning a QR Code
Open Settings on your Motorola Edge 50 Fusion and tap Network & internet.
You should see the connectivity settings page with options for internet, SIMs, hotspot, VPN, and related network controls.
Tap SIMs.
The phone should open the SIM management page, where installed physical SIMs and eSIM profiles are listed.
Tap Add SIM.
The setup screen should ask how you want to add a SIM or eSIM profile.
Tap Set up an eSIM.
Your Motorola Edge 50 Fusion should move to the eSIM setup flow and prepare the QR code scanner.
Point the camera at your iRoamly QR code and keep the code inside the scan frame.
The phone should detect the QR code and show a download or confirmation screen for the new eSIM profile. Use only your real iRoamly QR code; do not scan a sample code from a guide.
Tap Download or Add when the iRoamly eSIM profile appears.
Wait for the download to finish. Keep Wi-Fi connected and do not leave the setup screen while Android adds the eSIM profile.
Method 2: Install eSIM Manually
Open Settings on your Motorola Edge 50 Fusion and tap Network & internet.
This is the same entry point used for QR setup, and it takes you to the phone's network controls.
Tap SIMs.
You should arrive at the SIM management page for the Motorola Edge 50 Fusion.
Tap Add SIM.
The phone should show the SIM setup options again.
Tap Set up an eSIM.
The phone should open the eSIM setup flow, where you can choose a QR scan or manual entry path.
Tap Enter details manually on the QR code screen.
Android should open a manual entry form. On this Motorola/Android flow, enter the SM-DP+ Address and Activation Code from iRoamly. Leave Confirmation Code blank unless iRoamly gives you one.
Tap Continue, then tap Download or Add when the iRoamly eSIM profile is found.
Wait until Android finishes adding the iRoamly eSIM. If the details are not accepted, check for spaces, missing characters, or a copied QR-code string pasted into the wrong field.
How to Confirm Your iRoamly eSIM Is Installed
Open Settings, tap Network & internet, then tap SIMs.
The iRoamly eSIM should appear on the SIMs page as a new mobile profile. It may show a plan label, carrier profile name, or the name you assigned during setup.
Tap the iRoamly eSIM profile and check that Use SIM is turned on.
You should see the profile settings page with controls for mobile data, roaming, and other SIM preferences. Signal may not appear until you are in the destination country or connected to a supported network.
Configure eSIM for Mobile Data
Go to Settings > Network & internet > SIMs, then tap your iRoamly eSIM.
The iRoamly profile settings page should open so you can choose how the travel line is used.
Tap Mobile data and choose the iRoamly eSIM when Android asks which SIM to use for data.
This makes the travel eSIM your data line while your physical SIM can stay available for calls or texts if your home plan supports roaming.
Turn on Roaming for the iRoamly eSIM if your destination plan or iRoamly instructions require it.
Travel eSIM data often needs data roaming enabled to connect to partner networks abroad. Avoid turning on roaming for your primary SIM unless you want to use your home carrier's roaming service.
Troubleshooting
If Add SIM or Set up an eSIM is missing, update Android, restart the phone, and confirm that your Motorola Edge 50 Fusion regional model supports eSIM. Some market or carrier variants may not expose eSIM.
If the QR code does not scan, increase screen brightness on the device showing the QR code, clean the camera lens, and avoid glare. You can also use manual entry with the SM-DP+ Address and Activation Code.
If the QR code says it was already used, do not delete the eSIM. Contact iRoamly support because many eSIM QR codes can be installed only once.
If activation stays pending, keep Wi-Fi connected and wait a few minutes. Some travel eSIMs finish activation only when the phone reaches a supported destination network.
If the eSIM installs but mobile data does not work, select the iRoamly eSIM for Mobile data, enable Roaming for that eSIM, turn airplane mode on and off, and restart the phone.
If calls or SMS do not work, check the iRoamly plan details. Many travel eSIM plans are data-only, so calling and texting may need your primary SIM or an internet calling app.
If manual entry fails, confirm the SM-DP+ Address, Activation Code, and optional Confirmation Code exactly as iRoamly provided them. Do not add extra spaces or punctuation.
Conclusion
For the Motorola Edge 50 Fusion, scanning the iRoamly QR code is the quickest route because the Android 14 path from Network & internet to SIMs and Add SIM leads directly into the QR setup screen. Manual entry is still worth knowing, especially if the QR code is on the same phone or the camera cannot read it; just enter the SM-DP+ Address and Activation Code carefully.
After installation, return to Settings > Network & internet > SIMs and confirm that the iRoamly profile appears with Use SIM enabled. Before you travel, select the iRoamly eSIM for Mobile data, turn on Roaming for that eSIM when your plan requires it, and keep your primary SIM from taking over data unless you want carrier roaming charges.