The Motorola Razr 60 Ultra supports eSIM on compatible regional variants, giving travelers a way to add an iRoamly travel eSIM without removing a physical SIM. This guide assumes the Razr 60 Ultra, also sold in some markets as the Razr Ultra 2025, is running Motorola Android 15 with the main internal display open.
For travel, an iRoamly eSIM is useful because you can install the profile before departure and then choose it for mobile data at your destination. Some menu names may vary slightly by software version, carrier firmware, or region, especially around SIMs, Mobile network, and Download a SIM.
This guide covers both setup paths: scanning the iRoamly QR code and entering the eSIM details manually. The QR method is usually faster, while manual entry helps if the QR code is on the same phone, will not scan, or needs to be copied from your iRoamly account or email.
Before You Set Up Your iRoamly eSIM
Connect the Motorola Razr 60 Ultra to stable Wi-Fi before starting.
Confirm your Razr 60 Ultra variant supports eSIM. Some carrier or regional models may hide eSIM options.
Keep the iRoamly QR code ready on another screen or printed page for the QR method.
Keep the SM-DP+ Address, Activation Code, and optional confirmation code ready for manual entry.
Update the phone software if Settings > Network & internet > SIMs does not show eSIM options.
Install the iRoamly eSIM 1 to 2 days before travel when possible, but check your plan details first. iRoamly plan validity starts from activation, and the exact activation trigger can vary by plan.
Do not delete the iRoamly eSIM after installation unless iRoamly support tells you to. Many travel eSIM profiles cannot be reinstalled after removal.
iRoamly travel eSIM plans may be data-only. Voice calls and SMS availability vary by plan, so check the plan details before relying on them.
Method 1: Install eSIM by Scanning a QR Code
1. Open the Razr 60 Ultra, unlock the main display, and tap Settings.
You should see the main Motorola Android Settings list.
2. Tap Network & internet.
The phone should open the network settings page with internet, SIM, and connectivity options.
3. Tap SIMs.
You should see the SIM management screen where physical SIMs and eSIM profiles are listed.
4. Tap Add eSIM.
The phone should start the Android eSIM setup flow and look for a way to add a mobile plan.
5. Tap Set up using QR code or Scan QR code if the phone asks how you want to add the eSIM.
The camera scanner should open for the eSIM QR code.
6. Point the scanner at the iRoamly QR code and keep the code inside the frame.
The phone should read the QR code and show a screen asking whether to download the eSIM.
7. Tap Download or Download eSIM.
The Razr 60 Ultra should download the iRoamly eSIM profile over Wi-Fi.
8. Tap Done when the phone says the eSIM has been downloaded or added.
The setup flow should close, and the iRoamly eSIM should be available in SIMs.
Method 2: Install eSIM Manually
1. Open Settings on the Razr 60 Ultra.
You should see the same main Settings list used for the QR method.
2. Tap Network & internet.
The network settings page should open.
3. Tap SIMs.
The SIM management page should show your current SIMs and the eSIM add option.
4. Tap Add eSIM.
The Android eSIM setup flow should open.
5. Tap Set up manually, Enter code manually, or Need help? and then choose the manual-entry option shown on your software version.
The phone should display manual eSIM fields for the activation details.
6. Enter the iRoamly SM-DP+ Address and Activation Code exactly as shown in your iRoamly account or email. If the phone shows a Confirmation Code field and iRoamly did not provide one, leave it blank.
The phone should accept the details and enable the next step.
7. Tap Continue or Next.
The Razr 60 Ultra should check the eSIM information and show a download confirmation.
8. Tap Download or Download eSIM.
The phone should download the iRoamly eSIM profile using the manual activation details.
9. Tap Done when the eSIM has been downloaded.
The manual setup is complete, and the iRoamly eSIM should appear in the phone's SIM list.
How to Confirm Your iRoamly eSIM Is Installed
1. Go to Settings > Network & internet > SIMs.
The iRoamly eSIM should appear in the SIM list, usually with a carrier/profile name or a label you can rename.
2. Tap the newly installed eSIM profile.
You should see the eSIM detail page with the line switch and mobile network settings.
3. Make sure the eSIM switch is turned on.
The phone should show the iRoamly eSIM as enabled. If the plan includes voice or SMS, those services depend on the specific iRoamly plan and destination network; many travel eSIMs are data-only.
Configure eSIM for Mobile Data
1. Open Settings > Network & internet > SIMs.
The SIMs page should show the available SIM profiles, including the iRoamly eSIM.
2. Tap Mobile data or Data SIM.
The phone should show a list of SIMs that can be used for mobile data.
3. Select the iRoamly eSIM for mobile data.
The Razr 60 Ultra should mark iRoamly as the active data SIM.
4. Open the iRoamly eSIM profile and turn on Roaming or Data roaming if your iRoamly plan or destination instructions require it.
The roaming switch should be on for the travel eSIM, while your primary SIM can stay configured separately.
5. Turn off unwanted automatic data switching if your software offers an option such as Switch mobile data automatically.
The phone should continue using the iRoamly eSIM for travel data instead of falling back to your primary SIM.
6. At your destination, turn off Wi-Fi briefly and open a webpage or map.
The page should load over the iRoamly eSIM mobile data connection.
Troubleshooting
If Add eSIM is missing, confirm the Razr 60 Ultra variant supports eSIM, update Android, restart the phone, and check whether your carrier firmware restricts eSIM.
If the QR code will not scan, brighten the other screen, enlarge the QR code, clean the camera lens, or use manual entry with the iRoamly SM-DP+ Address and Activation Code.
If the QR code says it has already been used, do not delete the eSIM. Contact iRoamly support because many eSIM QR codes can be installed only once.
If activation stays pending, keep Wi-Fi connected, wait a few minutes, restart the phone, and check the iRoamly plan's activation rules.
If the eSIM is installed but data does not work, select iRoamly for mobile data, turn on data roaming for that eSIM when required, and confirm the destination is covered by the plan.
If the eSIM does not appear after download, return to Settings > Network & internet > SIMs, restart the phone, and check whether the profile is listed under a carrier name instead of iRoamly.
If calls or SMS do not work, check your plan details. Many iRoamly travel eSIM plans are for data only.
Conclusion
For the Motorola Razr 60 Ultra, scanning the iRoamly QR code through Settings > Network & internet > SIMs > Add eSIM is the quickest path when the QR code is on another device. Manual entry is the better backup when you need to type the SM-DP+ Address and Activation Code from your iRoamly details.
After installation, the important checks are simple: confirm the iRoamly profile appears in SIMs, turn the eSIM on, select it for mobile data, and enable data roaming when your destination plan requires it. Once those settings are in place, the Razr 60 Ultra is ready to use iRoamly travel data without disturbing your main SIM.