The Motorola Razr 60 is a foldable Android phone that supports eSIM on compatible regional models. This guide assumes a Motorola Razr 60 / Motorola Razr 2025 running Android 15 with Motorola Hello UX, where the eSIM path appears under Settings > Network & internet > SIMs.
Travelers often install an iRoamly travel eSIM before departure so mobile data is ready when they arrive. Install while you still have stable Wi-Fi, and remember that menu names can vary slightly by software version, region, and carrier firmware.
This guide covers both ways to install the iRoamly eSIM on the Motorola Razr 60: scanning the QR code and entering the eSIM details manually. The QR code method is usually faster, while manual entry is useful if you are viewing the QR code on the same phone or the camera cannot scan it.
Before You Set Up Your iRoamly eSIM
Connect the Motorola Razr 60 to stable Wi-Fi before you start.
Confirm that your phone is carrier-unlocked and that your regional model supports eSIM.
Keep your iRoamly QR code or manual setup details ready. Manual setup normally uses an SM-DP+ Address, an Activation Code, and an optional Confirmation Code.
Sign in to the Google account used on the phone if Android asks for account verification during setup.
Do not delete the iRoamly eSIM after installation unless iRoamly support tells you to. Many travel eSIM profiles cannot be reinstalled after removal.
Install the eSIM 1-2 days before travel if your plan allows it, but check your iRoamly plan details first. iRoamly validity starts from activation, and the exact activation trigger can vary by plan.
iRoamly eSIM plans may not include voice calls or SMS. Check the plan page for the destination before relying on calls or text messages.
Method 1: Install eSIM by Scanning a QR Code
1. Open Settings on your Motorola Razr 60 and tap Network & internet.
You should see the phone's connection settings, including the SIMs menu.
2. Tap SIMs.
The SIMs page opens and shows your current SIM or eSIM profiles.
3. Tap Add SIM.
Android opens the SIM setup screen so you can add a new physical SIM or eSIM.
4. Tap Set up an eSIM.
The phone prepares the eSIM setup flow and opens the QR code scanner.
5. Scan the iRoamly QR code from your purchase email or iRoamly account page.
Keep the QR code flat and well-lit. If the phone recognizes the code, it will show an eSIM download or confirmation screen.
6. Review the iRoamly eSIM details and tap Download.
Stay on Wi-Fi while the eSIM profile downloads. Do not close Settings during this step.
7. Wait for the download to finish, then tap Done if Android shows a completion button.
The iRoamly eSIM should now appear in Settings > Network & internet > SIMs.
Method 2: Install eSIM Manually
1. Open Settings and tap Network & internet.
This is the same starting point used for QR code setup.
2. Tap SIMs.
The phone displays the SIM management page for physical SIMs and eSIM profiles.
3. Tap Add SIM.
Android opens the screen where you can add a new SIM profile.
4. Tap Set up an eSIM.
The Motorola Razr 60 opens the same eSIM setup flow used by the QR method.
5. On the QR scanning screen, tap Enter activation code instead.
Use this option when you cannot scan the QR code or when the QR code is displayed on the Motorola Razr 60 itself.
6. Enter the SM-DP+ Address, Activation Code, and Confirmation Code if iRoamly provides one, then tap Continue.
Copy the details exactly from iRoamly. Extra spaces, missing characters, or mixing up the SM-DP+ Address and Activation Code can stop the download.
7. Review the iRoamly eSIM details and tap Download.
Keep Wi-Fi connected while Android downloads the eSIM profile.
8. Wait for installation to finish, then tap Done if prompted.
The iRoamly eSIM should be listed on the SIMs page after installation.
How to Confirm Your iRoamly eSIM Is Installed
1. Go to Settings > Network & internet > SIMs and look for iRoamly Travel eSIM or the label you assigned during setup.
If the profile appears under eSIMs, the installation completed. It may still be off until you enable it for travel.
2. Tap the iRoamly eSIM profile and check that Use SIM is available.
This confirms Android recognizes the profile and can turn it on when you are ready to use travel data.
3. If your iRoamly plan includes SMS or calls, test those services only after checking the plan details.
Many travel eSIM plans are data-only, so mobile data is the main confirmation step for most iRoamly users.
Configure eSIM for Mobile Data
1. Open Settings > Network & internet > SIMs, tap the iRoamly eSIM, and turn on Use SIM.
If Android asks whether to switch mobile data to this SIM, choose the iRoamly eSIM when you are ready to use travel data.
2. Return to SIMs, open the mobile data or data preference option, and select iRoamly Travel eSIM.
This tells the Motorola Razr 60 to use the iRoamly line for mobile data instead of your primary SIM.
3. Open the iRoamly eSIM settings again and turn on Roaming if your iRoamly plan or destination instructions require it.
Travel eSIM data often needs roaming enabled because the eSIM connects through partner networks in the destination country.
4. Turn off automatic data switching if you do not want the phone to fall back to your primary SIM for data.
This helps prevent unwanted roaming charges on your home SIM while traveling.
Troubleshooting
If Add SIM or Set up an eSIM is missing, confirm that the Motorola Razr 60 is unlocked, updated, and from a region that supports eSIM. Some carrier or regional variants may hide eSIM setup.
If the QR code will not scan, increase screen brightness on the device showing the code, clean the camera lens, and try again on Wi-Fi.
If the QR code says it was already used, do not delete the eSIM. Contact iRoamly support because many eSIM QR codes can be installed only once.
If manual setup fails, recheck the SM-DP+ Address, Activation Code, and optional Confirmation Code. Enter the values exactly as iRoamly provides them.
If the eSIM is installed but there is no data, turn on Use SIM, select iRoamly for mobile data, enable Roaming when required, and restart the phone.
If activation is pending, wait a few minutes on Wi-Fi. Some profiles finish setup only after the phone reaches a supported partner network.
If your primary SIM keeps taking mobile data, return to Settings > Network & internet > SIMs and set the data preference back to the iRoamly eSIM.
Conclusion
If your iRoamly eSIM has been installed successfully, most of the work is already done. The remaining steps are simply making sure the correct SIM is selected for mobile data, enabling roaming when required, and confirming your plan's activation conditions before you travel. These small checks can make a big difference when you arrive.
Once you're connected to a supported network, you can enjoy reliable mobile data for navigation, messaging, browsing, and other everyday travel needs without changing your physical SIM card. Preparing everything ahead of time helps ensure a smoother experience from the start of your journey.